Description
Caractéristiques techniques
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, radial | |
| Cooling lubricant | yes | |
| Series | Power Q | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 0250 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 25 mm | |
| Shank length LS | 56 mm | |
| Shank type | HB | |
| Cutter diameter min. Dc | 25 mm | |
| Cutter diameter max. Dc | 25 mm | |
| Neck diameter D1 | 15 mm | |
| Setting angle | 15 degrees | |
| Relief angle | -6 degrees | |
| Ramp distance Lp | 12.55 mm | |
| Number of cutters peripheral side Z | 2 | |
| Tool exchange | PowerCard | |
| Shank type | Weldon shank | |
| Diameter of shaft | 25 mm | |
| Interface | joint 1 | |
| Gauge length A | 39 mm | |
| Overall length L | 95 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | circular milling (round milling); countersinking (plunge milling) | |
| Machining strategy | HPC | |
| Type of product | End / face mill | |
| Content | single part | |
| Max. cutting depth L2 | 1.2 mm |
Identification et classification
| Référence article | 213000 25/2 | |
| EAN / GTIN | 4062406266349 | |
| Réf. fabricant | 213000 25/2 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, |
